Catalog

All-in-one kit containing: (1) Bose S1 Pro PA w/ power supply cable (2) Shure SM-58 Vocal Microphones (2) Microphone Clips (2) Microphone Stands (2) 25-foot XLR Cables (1) 15-foot Extension Cord The Bose S1 Pro has bluetooth connectivity for wireless transmission and a lithium-ion battery that allows for hours of cable-free usage.
More Info

Dynamic cardioid microphone. Requires XLR cable. Frequency response: 20-17,000 Hz Good for: - Drums/Percussion - Guitar/Bass amps
More Info

Dynamic cardioid microphone. Requires XLR cable. Frequency response: 80 to 20,000 Hz Good for: - Vocals - Instrumental
More Info

The Mackie ProFX12v3 provides you with great sound and features found in larger mixers while remaining portable. This mixer is equipped with seven Onyx preamps that provide top-notch sound for your keyboard, mics, and guitars. -GigFX effects engine delivers 24 effects including reverbs, delays, and choruses -7 Mackie Onyx mic preamps deliver clear signal and 60dB of gain -Rugged design will stand up to the wear and tear of the road -3 Band EQ and 100Hz low-cut filter on all channels -Built-in channel compression -48-volt phantom power on all mic channels -24-bit/192kHz A/D for unmatched audio quality -USB for playback music and recording into your computer -Balanced XLR and balanced/unbalanced outputs -Headphone output has separate volume control for comfortable monitoring
More Info

The ULTRA-DI DI400P is a passive DI (Direct Injection) box for connecting a guitar, bass or keyboard directly to your mixer. Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers. Allows direct connection to speaker outputs with up to 3,000 Watts Ground Lift switch eliminates typical ground loop problems. Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer
More Info

Yamaha MG10XU The MG10XU from Yamaha is a compact ten-input mixer with built-in effects for performances, lectures, recordings, and similar applications. The mixer features four mic/line combo inputs with D-PRE mic preamps as well as six 1/4" line inputs with stereo level controls. It also features USB connectivity and is capable of providing two channels in and two channels out to your computer at up to 24-bit / 192 kHz, ideal for recording live performances, demos, and more. Each of the four mic/line inputs is equipped with a 3-band EQ, pan control, and a high-pass filter. The four D-PRE mic preamps feature an inverted Darlington circuit and switchable 48V phantom power for use with dynamic and condenser microphones. They also each feature 26 dB attenuation switches for recording loud sound sources such as guitar amplifiers. The MG10XU mixer has stereo XLR and TRS outs for connecting to your PA system or monitor speakers. It also has a 1/4" headphone output with level control for personal monitoring as well as additional TRS 1/4" stereo monitor outs for sending to powered speakers, amplifiers, or devices such as digital recorders. Each of the MG10XU's channels feature a dedicated FX bus send level and there are 24 effects presets to choose from. The overall level of the FX bus is controlled by the dedicated FX return level control. Providing reverbs, delays, phaser, flanger, chorus, tremolo, auto-wah, distortion, and more, these effects can be used to help vocals and instruments sit better in your mix.
More Info

Guitar amp with two 1/4" inputs, volume and gain control, three-band EQ, 1/4" line out, and 1/4" footswitch.
More Info

All-in-one PA system with seven-channel powered mixer and full-range speakers 375 watts Bluetooth® audio streaming Nine inputs (four XLR ¼” combination, ¼” instrument/line, ¼” stereo, 1/8” stereo, stereo Bluetooth®) Sub output with automatic high-pass filter for powered subwoofer use Volume, treble, bass and reverb controls on each channel
More Info

Powered monitor with XLR input, 1/4" input and output, three-band EQ, and volume control.
More Info

Bass amp with passive and active 1/4" inputs, volume control, three-band EQ, 1/4" line out, and 1/4" headphone out.
More Info

Vertical Microphone stand
More Info

Articulating boom microphone stand
More Info

Height: 14.5 - 26.25"
More Info

The UltraLite-mk3 Hybrid from MOTU is a hybrid FireWire and USB 2.0 audio and MIDI interface for Windows and Mac computers with built-in DSP processing that also offers powerful stand-alone mixer functionality. It connects to both Mac and Windows computers through either a FireWire or USB port and provides high-resolution audio inputs and outputs for the connected computer. This item comes with: (1) Power Supply Cable (1) Firewire 400 to 800 cable (1) Firewire 800 to thunderbolt adapter (4) 1/4" TRS-M to XLR-M
More Info

Compact & Portable Bluetooth PA Speaker with Wireless Microphone suitable for basic amplification, Built-in Rechargeable Battery, MP3/USB/SD (600 Watt) WIRELESS AUDIO STREAMING: Built in Bluetooth with Wireless Range of up to 33' so you can play music from devices like iPhone, Android mobile phone, iPad, Tablet, PC Bluetooth Version 30 AUDIO CONFIGURATION AND RECORDING: This PA Amplifier Speaker and Mic Set can Record Audio as streamed through the speaker or via the included external microphone which is perfect for rehearsing or singing practice It also has an echo, Bass, and Treble Controls for Dj sounds SUPPORTS USB / SD CARD: The device is also equipped with USB / SD Card Readers and AUX 35 millimeter Input cable for connecting external devices Compatible with MP3 digital audio files RECHARGEABLE BATTERY: Built in rechargeable battery which makes it convenient and portable.
More Info

Dynamic super-cardioid microphone. Requires XLR cable. Frequency response: 40-15,000 Hz Good for: - Guitar amps - Drums/Percussion
More Info

Dynamic cardioid microphone. Requires XLR cable. Frequency response: 50 to 15,000 Hz Good for: - Vocals - Harmonica
More Info

Two wireless handheld microphone transmitters and receiver. All equipment travels in carrying case with receiver permanently fixed. Kit Includes: - (1) Shure BLX88 Wireless Dual Receiver and power cord - (2) Shure PG58 Wireless Handheld Mics and mic clips - (8) Rechargable Batteries and Charger - (2) 6' XLR Cables
More Info

Dynamic cardioid microphone. Requires XLR cable. Frequency response: 40 to 15,000 Hz Good for: - Vocals - Acoustic Strings - Brass/Woodwinds - Harmonica - Drums/Percussion
More Info

Condenser cardioid microphone. Requires XLR cable. Frequency response: 20 to 20,000 Hz *Requires a mixer capable of providing phantom Power Good for: - Choir - Acoustic Strings - Brass/Woodwinds - Piano/Organ - Drums/Percussion
More Info

Samson’s LS2 Lightweight Speaker Stands raise your music to where audiences can enjoy it to the fullest. The pair of lightweight, telescoping tripod speaker stands features a roadworthy, steel-constructed design with a sleek black finish. With their standard 1 3/8-inch pole adapters, the LS2s fit virtually all PA speakers. Adjustable up to six feet in height, each stand can handle enclosures that weigh up to 55 pounds (25kg). This kit includes 1 stand and is compatible with the Fender Passport speaker system and Bose A Capella kits in our inventory. Use of these stands with any other equipment must be approved by UP staff.
More Info

$100 RENTAL FEE (per kit) All-in-one kit including: (5) Sennheiser XSW 2-ME2 wireless belt pack transmitters and rack-mount receivers (5) Countryman E6 over-the-ear omnidirectional microphones (black) (5) Shure neoprene transmitter belt pouches (1) 10' audio snake (1) Furman power conditioner (1) Powerex battery charger (14) Powerex AA rechargeable batteries (1) Binder of instructions
More Info

Kit includes: Casio Privia PX-S3100 88-Key Slim-Body Portable Digital Piano with a folding X-style stand, a folding X-style height-adjustable piano bench, the SP-34 pedal board with Sustain, Soft, and Sostenuto, and a keyboard case is included to securely transport and store the piano. The Privia PX-S3100 takes the award-winning PX-S design to new heights with enhanced piano sound, improved speakers, upgraded Bluetooth connectivity, and more. Stunning German concert grand piano with enhanced resonance -700 tones, 200 accompaniment Rhythms -Smart Scaled Hammer Action Keyboard with simulated ebony/ivory key textures -Beautiful polished top panel design with illuminated touch sensor controls -Includes WU-BT10 Bluetooth Audio and MIDI adapter -3-track MIDI recorder, USB audio recording and audio/MIDI file playback -Designed to work with the free Casio Music Space iOS/Android app -Slim design that weighs less than 25 pounds -Optional 6xAA battery power (AC adapter included) -Class-compliant USB port with no drivers or installation needed
More Info

Pearl Roadshow 5-piece drum kit with high hat and symbols. Comes in road cases with stool and drum rug.
More Info

ClearSonic A5-4 panels put effective acoustic separation between instruments, while allowing line of sight to musicians and instruments. The panel system includes full-length hinges and cable cutouts. The drum shield can be folded accordion-style for transport. The transparent panels are 2' W x 5.5' H, high enough to block the cymbals.
More Info

Adjustable height. Stores and travels on rolling cart. 12 stands per cart. Arrange with your TD for pick up at BRL.
More Info

Vekkia Super Bright Rechargeable Music Stand Light - Musicians Piano Light Clip On, USB-C, 9 Levels Dimmable
More Info

Cordless rechargeable LED music stand light with three brightness settings. Comes in case with goose neck light, battery pack/clip, and charging cable. Does not come with charging brick. Check out the Anker USB Power Strip if you need one. Battery fully charges in 3.5 hours and provides 8, 15, or 25 hours of illumination at 90, 45, and 20 lumens, respectively.
More Info

Each reservation is for 1 pack of 10 straps. (10 packs =100 straps) Use instead of or in addition to zip ties for securing audience chairs for fire code compliance.
More Info

3500 Lumens and native XGA (1024x768) resolution 5W speaker and integrated Closed Captioning (CC) decoder Network-capable – for remote monitor and control with included software HD-Ready — supports 720p, 1080i auto keystone correction, Instant On, Instant Off®, A/V Mute Slide Door, 1.6x zoom Includes mounting hardware and 1 remote for both projectors.
More Info

For use with projection systems. (loaded with Q Lab 4, Isadora, and Millumin). The Macbook Pro is available for running sound and/or projection during residencies in theaters and for development of sound and/or projection cues for 1 week prior to residencies in theaters. Requests for other uses will be considered on a case by case basis.
More Info

Kit includes: - Panasonic PT-EZ770U Projector - Pipe mount - Digital Interface - Standard Lens 1.64-2.79 - Wide Lens (ET-ELW20) 1.3-1.7 - Short Throw Lens (ET-ELW22) .78-.98 - 50' Cat5 Cable - 5' HDMI Cable - Power Cable and Surge Protector The wide lens (ET-ELW20) is only in one of the kits. Be sure to specify if you need it or not. Manual: https://eww.pavc.panasonic.co.jp/projector/extranet/main/products/ez770/manual/pt-ez770_en.pdf
More Info

The Matrox TripleHead2Go DP Edition external multi-display adapter adds up to three video outputs to your computer. It connects to the video output of your system and uses the system's existing GPU to provide high-quality, uncompressed graphics and video across all monitors. This little black box lets you run different applications on each display or view one application across multiple monitors. Creates a stretched desktop with a maximum resolution of 5760x1080 (3x[1920x1080]) across three displays or 3840x1200 (2x[1920x1200]) across two. Includes: - (1) Matrox TripleHead2Go DP Edition - (1) Displayport Cable - (1) Displayport to MiniDiplayport adaptor - (1) USB Cable - (3) Displayport to HDMI adaptor - (1) Hookup instructions
More Info

Panasonic 4K camera with SD Card and Tripod Portable video Monitor Apple Mac Mini 2021 with keyboard, mouse on OBS Studio software Blackmagic Design ATEM Mini HDMI Live Stream Switcher
More Info

Chauvet 4BAR Tri USB is a complete wash lighting solution fitted with four high-intensity RGB LEDs that can be controlled through wired or wireless DMX via the ETC ColorSource 20 console. Lightweight and transportable, it includes a tripod stand and carrying bag for quick and easy setup and tear down making this perfect for non-traditional performance spaces. Includes: - Chauvet 4BAR Tri USB and padded carrying case - Chauvet tripod stand and carrying case - Power cord Trunnions available for floor mounting. Be sure to request from UP, if desired.
More Info

This pair of Chauvet Colorband H9 USBs is a simple lightweight solution for shows in non-traditional performance spaces. Each 9-LED strip light functions in three 3-LED zones, allowing for multi-color effects or looks. Both lights come in the same carrying bag and can be controlled through wired or wireless DMX via the ETC ColorSource 20 console. LEDs are RGBAW+UV. Includes: - two Chauvet Colorband H9 USBs - two power cords - padded carrying case
More Info

The Chauvet D-Fi wireless DMX system allows for cable free control of certain Chauvet lighting instruments, including the 4BAR Tri USB and Colorband H9 USB fixtures. Includes: - D-Fi Hub transceiver - 3-pin to 5-pin DMX adapter - Power cord - Four USB transmitters - Carrying case
More Info

Wireless DMX System for Chauvet Lighting Instruments with 1 Transmitter, 8 Receivers, and Multi-charger.
More Info

The Chauvet EZLink Par (4-Pack) is a set of four high-intensity, RGB LED lighting fixtures that can be operated either wired or wirelessly, and can be controlled by the included IRC Remote, Android and iOS devices (via the BTAir app), or traditional lighting consoles. To operate with the included remote or via the BTAir app, you only need this kit and a mobile device with the BTAir app installed. To operate wirelessly over DMX, you will need the Chauvet D-Fi Hub and USB. Includes: (4) Chauvet EZLink Pars (4) IEC power cables (1) 4-outlet powerstrip (1) IRC Remote (1) Instruction Card
More Info

The Chauvet LED Followspot features a 75-watt white LED that casts a focused hard-edged beam. The unit features an electronic strobe, LED dimming, a mechanical iris, and a gobo slot. The back control panel of the unit features 7 push buttons for selecting dichroic colors (orange, cyan, red, green, magenta, blue) plus white. There are two buttons for changing the amount of dimming and two buttons for controlling the shutter, including the electronic strobe and blacking out the light. Function buttons allow you to switch between manual, DMX control, and primary/replica mode. DMX in and out connectors enable three channels of programmable DMX control over the unit's dimmer, color, and strobe. Includes a tripod for freestanding operation, DMX 5-pin to 3-pin converters, and 50' of DMX Cable.
More Info

The ColorSource console allows for basic lighting control in a small lightweight package. Great for setting up a lighting system from scratch in non-traditional performance spaces. Includes: - ColorSource 20 console - Power cord - USB mouse - Padded carrying case
More Info

City Theatrical's new Multiverse® SHoW Baby® is a wireless DMX transceiver that delivers breakthrough plug and play wireless DMX and RDM transmission. ... Use it to build new single universe Multiverse systems, or use Multiverse SHoW Baby as a receiver on multiple universe systems with a Multiverse Transmitter.
More Info

For use with S4 pars.
More Info

Rosco's RHA Indexing Rotators allow you to stop and start the gobo's rotation precisely, whenever and wherever you want. This is particularly useful for repetitive effects, such as the hands of a gobo clock, or for architectural effects, such as a shop display window. Rosco's Indexing Rotators are controlled through DMX512 and the DMX addressing facility is built into the unit. You control both the speed and direction of the rotation as well as the indexing position (up to 180 degrees available) and the amount of time the gobo stays in that position. Kit includes power supply and 1 50’ 5 pin DMX cable.
More Info

Drop in iris fits the accessory slot on an ETC SourceFour. Changes the size of the circular beam given by the light
More Info

The ImagePro projects an image created from a simple plastic slide. Attach an iPro Slide cartridge to the back plate of the ImagePro and insert it into the iris slot of any one of several common luminaires. Then simply turn on the light to project anything from a dazzling full color panorama to a logo, or even a last minute custom gobo texture.
More Info

-
More Info

Stage pin
More Info

stage pin
More Info

stage pin
More Info

The 25' 12-Gauge Edison AC Extension Cord with three plugs can handle a maximum of 20 amps, 125 volts, and 2400 watts.
More Info

5-pin DMX Cable.
More Info

Female edison to male stage pin adapter.
More Info

Male edison to female stage pin adapter
More Info

Stage pin. 2 Female to 1 male adapter.
More Info

Anker PowerPort 10: a 10-port USB power strip. OR Sabrent 3.0 USB Hub
More Info

From the Instructions: "The bubble machine can produce bubbles all over the sky and create color dream-like world under the sun." Edison connector.
More Info

ePuffer brand Robusto Electronic Cigar. Prop electronic cigar with 180 minutes of vape time with Cuban cigar flavor. Nicotine-free and approved by Actors’ Equity Association for on-stage use.
More Info

epuffer Nicotine-free and approved by Actors’ Equity Association for on-stage use. These props are intended to be used by a single performer for the run of the production and then disposed. 1 prop should function for all performances. These props are for ONSTAGE use ONLY. The ePuffer ECO Premium Tobacco flavored Disposable eCigarette has a pharma-grade Propylene Glycol (PG) to pharma-grade Vegetable Glycerine (VG) ratio of 70% to 30%, with a flavor ratio of 15% and is made with 100% traceable top grade ingredients. The quality of the ePuffer Eco Premium Tobacco E-Cigarette is guaranteed and it has been lab-tested to be free of Diacetyl (DA), Acetyl Propionyl (AP) and Vitamin E acetate. ePuffer is the first company that started designing the disposable electronic cigarettes made with food-grade materials and safe for the environment. All ePuffer disposable e-cig products have a Soft Filter, use DiRECT|Flow™ technology and feature ePuffer’s exclusive True Nicotine Content eliquid formula, which allows users to experience smoother draw, enhanced rich flavor and dense vapor production. Features Powered by a pre-charged 3.7V cylindrical lithium battery Length: 4.7" | 12cm Weight: 10 grams Color options: White/Tan or Black Cartridge capacity: 1.2ml A glowing charcoal LED design A protective square tube for storage and traveling Eliquid E-Liquid Base ( Tobacco Formula ) Pharma Grade Propylene Glycol ( PG ) - 70% Pharma Grade Vegetable Glycerine ( VG ) - 30% Flavor Ratio: 15%
More Info

Smoke In Style brand Electronic Cigar. Rechargeable prop electronic pipe with refillable atomizer. Nicotine-free and approved by Actors’ Equity Association for on-stage use.
More Info

Use of stage fog is not permitted in college theaters. In other venues, YFCC Fire-Watch may be required. Contact your UP adviser ASAP to begin a conversation about the suitability of fog for your event. Check out of this equipment is only possible after a review process involving Undergraduate Production and Fire Code Compliance. Fog Juice is stocked in UP office.
More Info

Realistic flicker. Each item is a set of 12.
More Info

Use of stage fog is not permitted in college theaters. In other venues, YFCC Fire-Watch may be required. Contact your UP adviser ASAP to begin a conversation about the suitability of fog for your event. Check out of this equipment is only possible after a review process involving Undergraduate Production and Fire Code Compliance. The Unique 2.1 haze machine offers standard DMX, variable output and haze density, and low operating noise. This machine is able to fill from a small room to a hall with a constant haze. With its variable output it can be used to create any desire effect from the finest mist to a thick fog-like haze. The Unique 2.1 is ready for operation almost immediately with a warm up time of approximately 60 seconds. The Unique 2.1 is controlled via DMX 512 and the pump and fan can be adjusted separately. The DMX start address will be adjusted and saved with the buttons on the display and it will remain saved even when the machine is disconnected from the mains supply. It can also be controlled through an analog lighting desk and/or cable remote. The fan will be adjusted directly at the machine, the pump can be adjusted via the disk or remote. Connection is done with 3-pin XLR. Look Solutions UN-0371 Hazer Features: Pump and fan adjustable separately in 99 steps Internal fan ensures quick and homogen distribution DMX, analog or stand-alone running Internal Timer Haze-Density Control System Minimal fluid consumption (2I canister guarantees up to 50 hours of continous output) Look Solutions UN-0371 Hazer Specifications: Power Requirement: 1500 Watts Voltage: 230 V / 50 Hz; 120 V / 60 Hz; 90 V / 50Hz Internal Fan: >6000 I/min Weight: approx 9.7 kg
More Info

Use of stage fog is not permitted in college theaters. In other venues, YFCC Fire-Watch may be required. Contact your UP adviser ASAP to begin a conversation about the suitability of fog for your event. Check out of this equipment is only possible after a review process involving Undergraduate Production and Fire Code Compliance. The Viper NT originate from the continued development and improvement of the Viper fog machine. It unites the current digital technology with the proven technique and power of its predecessor. New features guarantee a much more simple operation – place and fog, reducing the amount of time needed to set up the machine. Features • Control panel The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. • Finest adjustments of the output Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Viper NT to be used in both small and large locations. • DMX 512 as standard The Viper nt can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR- plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary. • Internal timer With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. The following Look-fog fluids are available for the Viper NT: · Quick-Fog (thick, quick disappearing fluid) · Regular-Fog (thick, long lasting fluid) · Slow-Fog (thick, extremly long lasting fluid)
More Info

Simulated flame machine with 3 built in fans. Edison connector.
More Info